Item Description
Item Description:
one. Flexspline is a hollow flanging common cylinder composition.
two. There is a massive-diameter hollow shaft hole in the middle of the cam of the wave generator. The inside style of the reducer has a assistance bearing.
three. It has a completely sealed framework and is effortless to set up. It is very ideal for instances the place the wire requirements to be threaded from the heart of the reducer.
Benefits:
one. High precision,high torque
two. Devoted specialized personnel can be on-the-go to give design and style solutions
three. Factory immediate revenue fine workmanship resilient quality assurance
4. Item good quality concerns have a one particular-12 months warranty time, can be returned for substitute or fix
Company profile:
HangZhou CZPT Engineering Co., Ltd. recognized in 2014, is fully commited to the R & D plant of large-precision transmission parts. At existing, the annual production capacity can attain 45000 sets of harmonic reducers. We firmly think in good quality first. All links from uncooked resources to concluded items are strictly supervised and managed, which gives a reliable foundation for merchandise high quality. Our goods are bought all above the country and abroad.
The harmonic reducer and other substantial-precision transmission factors have been independently produced by the firm. Our organization spends 20% of its sales each 12 months on the analysis and growth of new technologies in the market. There are 5 men and women in R & D.
Our advantage is as below:
one.7 a long time of advertising encounter
two. 5-man or woman R & D team to give you with specialized assist
3. It is sold at property and overseas and exported to Turkey and Ireland
4. The merchandise good quality is assured with a one-yr guarantee
five. Items can be custom-made
Strength factory:
Our plant has an complete campus The variety of workshops is all around 300 Whether or not it really is from the generation of raw materials and the procurement of uncooked materials to the inspection of concluded products, we are doing it ourselves. There is a comprehensive production technique
HST-III Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start cease | The allowable maximum of the typical load torque | Maximum torque is allowed in an immediate | Allow the optimum velocity to be entered | Average input velocity is authorized | Back hole | design and style daily life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | fifty | six.two | .6 | twenty.seven | two.1 | seven.nine | .7 | 40.three | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | nine | .nine | 27 | two.7 | twelve.seven | one.3 | 54.1 | five.5 | |||||
100 | nine | .9 | 32 | 3.three | 12.seven | 1.three | sixty two.1 | 6.three | |||||
17 | fifty | eighteen.four | one.9 | 39 | four | 29.nine | 3 | eighty.five | 8.2 | 6500 | 3000 | ≤30 | 15000 |
eighty | 25.three | 2.six | forty nine.5 | five | 31 | three.2 | a hundred.1 | 10.two | |||||
one hundred | 27.6 | two.8 | sixty two | 6.three | 45 | four.6 | 124.two | 12.7 | |||||
20 | fifty | 28.8 | 2.nine | 64.4 | six.six | 39 | four | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
eighty | 39.one | four | 85 | 8.eight | 54 | 5.five | 146.1 | 14.9 | |||||
one hundred | forty six | four.seven | ninety four.three | nine.6 | 56 | five.8 | 169.1 | seventeen.two | |||||
120 | forty six | four.7 | a hundred | 10.2 | 56 | five.eight | 169.1 | 17.two | |||||
a hundred and sixty | 46 | 4.seven | 100 | ten.two | 56 | five.eight | 169.one | 17.2 | |||||
25 | fifty | forty four.nine | four.six | 113 | eleven.five | 63 | 6.five | 213.nine | 21.eight | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | sixteen.one | a hundred | ten.2 | 293.3 | 29.9 | |||||
a hundred | seventy seven.one | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
a hundred and twenty | 77.1 | seven.9 | 192 | 19.6 | 124 | 12.seven | 349.six | 35.six | |||||
32 | fifty | 87.four | eight.9 | 248 | 25.3 | 124 | twelve.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | a hundred thirty five.7 | thirteen.8 | 350 | 35.6 | 192 | 19.six | 653 | sixty six.six | |||||
100 | 157.6 | sixteen.one | 383 | 39.one | 248 | 25.3 | 744 | 75.nine | |||||
40 | 100 | 308 | 37.2 | 660 | sixty seven | 432 | 44 | 1232 | 126.seven | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at commence cease | The allowable highest of the regular load torque | Maximum torque is authorized in an instant | Let the highest pace to be entered | Regular enter speed is allowed | Back gap | design and style life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | .seven | 23 | 2.3 | nine | .nine | 46 | four.7 | 14000 | 8500 | ≤20 | 15000 |
eighty | ten | one | 30 | 3.1 | fourteen | 1.4 | sixty one | six.two | |||||
a hundred | 10 | one | 36 | three.7 | 14 | one.four | 70 | seven.2 | |||||
17 | fifty | 21 | 2.one | forty four | four.five | 34 | 3.four | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | two.9 | 56 | 5.7 | 35 | three.6 | 113 | twelve | |||||
100 | 31 | three.two | 70 | seven.two | 51 | 5.two | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.four | 44 | four.five | 127 | thirteen | 10000 | 6500 | ≤20 | 20000 |
eighty | 44 | four.five | ninety six | nine.8 | sixty one | six.2 | a hundred sixty five | seventeen | |||||
one hundred | 52 | 5.three | 107 | ten.nine | 64 | six.five | 191 | twenty | |||||
a hundred and twenty | 52 | five.three | 113 | eleven.five | 64 | six.five | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | sixty four | 6.5 | 191 | twenty | |||||
25 | fifty | fifty one | five.2 | 127 | 13 | 72 | seven.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | eighty two | eight.four | 178 | eighteen | 113 | twelve | 332 | 34 | |||||
a hundred | 87 | eight.nine | 204 | 21 | one hundred forty | fourteen | 369 | 38 | |||||
a hundred and twenty | 87 | eight.9 | 217 | 22 | a hundred and forty | fourteen | 395 | forty | |||||
32 | fifty | ninety nine | ten | 281 | 29 | 140 | fourteen | 497 | fifty one | 7000 | 4800 | ≤20 | 20000 |
eighty | 153 | sixteen | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | eighteen | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | seventy five | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibitions:
Application scenario:
FQA:
Q: What need to I offer when I pick a gearbox/velocity reducer?
A: The very best way is to provide the motor drawing with parameters. Our engineer will examine and suggest the most appropriate gearbox design for your reference.
Or you can also supply the below specification as properly:
1) Kind, model, and torque.
2) Ratio or output pace
3) Functioning problem and connection approach
4) Good quality and installed device name
5) Enter method and enter velocity
6) Motor brand name product or flange and motor shaft dimension
US $309.5 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery, Hst-I |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
US $309.5 / Piece | |
1 Piece (Min. Order) |
###
Application: | Motor, Machinery, Agricultural Machinery, Hst-I |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
###
Samples: |
US$ 100/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
###
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed peak torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Agricultural Gearboxes
There are several types of agricultural gearboxes, and they are used in various applications. Among them are Bevel gearboxes, CZPT speed gearboxes, and Worm gear speed reducers. If you’re looking for a reliable, high-performing agricultural gearbox, you’ve come to the right place. Read on to learn more about these gearboxes. Also, check out our guide to bevel gearboxes.
Bevel gearboxes
The fatigue life of bevel gearboxes in agricultural equipment is determined by the cumulative damage sums for different operations. A simulation model was used to assess the fatigue life of a spiral bevel gear. The accumulated damage sums for each operation were shown in figure 9a. The subsoiler tillage operation exceeded the damage sum of one. This criterion indicates that the fatigue life of a gearbox is shorter than its service life.
In bevel gearboxes, the second shaft has two shafts that are connected to each other. One shaft is mounted to the outer surface of the housing 3 through bearings, while the other shaft has a flange that protrudes into the gear housing. The second shaft is attached via bearings on the gear housing and flange. It is mounted in this way to allow the bevel gear to rotate smoothly.
CZPT speed gearboxes
If you are an agricultural machine owner, you know that the right speed agricultural gearboxes can make the difference between a profitable crop harvest or a disaster. Today’s agricultural machinery can be found in a variety of applications, including for crop and animal production. Many of these applications require heavy-duty gearboxes with large capacity. The quality of these agricultural gearboxes depends on the quality of their bearings, which are important to the longevity of your equipment.
Industrial CZPT gearboxes can be repaired and overhauled by qualified and experienced technicians at CZPT Products. CZPT gearboxes can be repaired or rebuilt at significant savings. For industrial uses, the RAR model is perfect for applications where space is a consideration. Industrial CZPT gearboxes are available in multiple sizes and types, and they can be customized to meet your unique needs. For the best price and service, contact CZPT Products today!
CZPT speed bevel gearboxes
The demand for food has skyrocketed since the 2010 global financial crisis, and while the world’s population is still rising, at a slower rate, land is not. This is forcing agricultural machinery manufacturers to come up with innovative solutions to maximize the use of available land. The need for agricultural machinery is also growing due to shorter cropping cycles and wear and tear on equipment. CZPT gearbox manufacturers are meeting this demand with high-quality products.
A number of benefits make CZPT speed bevel gearboxes the preferred choice for agricultural applications. In addition to its renowned performance, the product’s design has been adapted for use in agricultural and glass machinery. The result is a unit with low backlash and high transmission. Moreover, the CZPT model is the best all-rounder among servo right-angle gearboxes.
editor by czh 2023-01-31