China wholesaler High Moment Overload Capacity Pto Gearbox for 750W 1000W Stepper and Servo Motor car gearbox

Product Description

Product Description

high moment overload capacity pto gearbox for 750W 1000W Stepper and Servo Motor for plasma cutting machine is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

high moment overload capacity pto gearbox for 750W 1000W Stepper and Servo Motor characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.

WAD series parameters Model number WAD042 WAD064 WAD090 WAD100 WAD140 WAD200 WAD255
Rated output torque 14~20 40~60 100~160 230~330 450~600 900~1200 1500~2000
Reduction ratio L1:3,4,5,7,10     L2:20,25,35,40,50,70,100,21,31,61,91
Planetary gear backlash L1:P1≤3     P2≤5            L2:P1≤5   P2≤7

 

Detailed Photos

Product Details

Other products

Product Advantage

Compared with other reduction machines, planetary gear reduction machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics, planetary gear reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Company Profile

Factory Display

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Shipping Cost:

Estimated freight per unit.



To be negotiated
Application: Motor, Machinery, Agricultural Machinery, Medical Instruments
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Customization:
Available

|

Customized Request

pto gearbox

Challenges in Using Miter Gearboxes

While miter gearboxes offer various advantages, they also come with certain challenges that need to be addressed:

Lubrication: Proper lubrication is crucial for miter gearboxes to minimize friction, heat, and wear between gear teeth. Ensuring consistent and sufficient lubrication in the gearbox can be challenging, especially in enclosed or hard-to-reach spaces.

Maintenance: Miter gearboxes require periodic maintenance to ensure their optimal performance and longevity. Maintenance tasks may include checking and replenishing lubrication, inspecting gear teeth for wear, and addressing any misalignment or mounting issues that may arise over time.

Backlash: Backlash, or the clearance between gear teeth, can impact the accuracy of motion transfer. Excessive backlash can lead to reduced precision and positioning errors in applications that require high accuracy.

Complex Design: Miter gearboxes have a more intricate design compared to some other gearbox types, which can make manufacturing, assembly, and maintenance more complex. This complexity may also result in higher manufacturing and maintenance costs.

Efficiency Loss: Miter gearboxes can experience efficiency losses due to factors such as friction and misalignment. These losses can reduce the overall efficiency of power transmission, leading to energy wastage.

Space Constraints: In some applications, space limitations can pose a challenge when integrating miter gearboxes, especially when larger gear ratios are required to achieve the desired motion direction change.

Shock Loads: Applications subject to sudden shock loads or high impact forces can pose challenges for miter gearboxes. Adequate measures, such as using shock-absorbing components or designing for higher durability, may be required to address these challenges.

Alignment and Mounting: Proper alignment and mounting of miter gearboxes are critical to ensure smooth operation and prevent premature wear. Achieving precise alignment can be challenging, especially in installations with limited access or complex geometries.

Cost Considerations: The design complexity and manufacturing requirements of miter gearboxes can contribute to higher costs compared to simpler gearbox types. Balancing the benefits of miter gearboxes with the associated costs is essential during the selection process.

Addressing these challenges often requires careful engineering, proper maintenance practices, and consideration of specific application requirements. Despite the challenges, miter gearboxes remain valuable components in various industries where their unique motion direction-changing capabilities are advantageous.

pto gearbox

Miter Gearboxes in Robotics and Automation Applications

Miter gearboxes are indeed utilized in robotics and automation applications, leveraging their unique capabilities for precise motion control and direction change:

Precision Motion: In robotics, miter gearboxes can be employed to achieve precise and accurate motion at right angles, allowing robots to perform intricate tasks with accuracy.

Joint and Arm Movements: Robotic arms often require precise movement and control at various angles. Miter gearboxes enable smooth and controlled motion changes, contributing to the versatility of robotic arms.

Direction Change: Many automation systems involve the need to change the direction of motion, such as conveyors or assembly lines. Miter gearboxes efficiently handle these changes, ensuring seamless operation.

Space Optimization: Robots and automated systems often operate in confined spaces. Miter gearboxes’ compact design makes them suitable for integrating into space-constrained environments.

Responsive Control: Automation applications demand responsiveness and accurate control. Miter gearboxes provide the necessary motion control for timely and precise execution of tasks.

Noise Reduction: In robotics and automation, quiet operation is essential. Miter gearboxes, with reduced backlash and noise, contribute to a quieter working environment.

Miter gearboxes play a crucial role in enhancing the efficiency, accuracy, and versatility of robotics and automation systems by facilitating controlled motion changes and direction shifts.

pto gearbox

Advantages of Using a Miter Gearbox in Various Applications

Miter gearboxes offer several advantages in various mechanical applications:

  • Change of Motion Direction: One of the primary advantages of miter gearboxes is their ability to change the direction of rotational motion by 90 degrees. This allows for efficient power transmission and motion redirection in tight spaces or when components need to be oriented differently.
  • Space Efficiency: Miter gearboxes are compact and space-saving solutions for transmitting power around corners or obstacles. They eliminate the need for additional components or complex mechanisms to achieve a change in motion direction.
  • Torque Transmission: These gearboxes are capable of transmitting high levels of torque between intersecting shafts. The meshing of bevel gears provides a solid and reliable torque transfer, making miter gearboxes suitable for applications requiring substantial torque conversion.
  • Precision and Alignment: Miter gearboxes ensure accurate alignment and synchronization between input and output shafts. The conical shape of bevel gear teeth allows for smooth meshing and reduces the potential for backlash, ensuring precise motion transfer.
  • Wide Range of Applications: Miter gearboxes find utility in diverse industries, including robotics, automotive, aerospace, manufacturing, and machinery. Their flexibility and ability to redirect motion make them suitable for tasks ranging from conveyor systems to steering mechanisms.
  • Reduced Maintenance: The simplicity of the miter gearbox design often results in lower maintenance requirements. The robust construction and efficient power transmission contribute to extended operational lifetimes.

Overall, the advantages of using a miter gearbox make it a versatile and effective solution for applications that demand changes in motion direction, space-saving designs, and reliable torque transmission.

China wholesaler High Moment Overload Capacity Pto Gearbox for 750W 1000W Stepper and Servo Motor   car gearbox	China wholesaler High Moment Overload Capacity Pto Gearbox for 750W 1000W Stepper and Servo Motor   car gearbox
editor by CX 2023-09-05