China manufacturer Hole Outputhigh Torque Transmission Mechanical Speed Variator Planetary Speed Reducer Small Gearbox best automatic gearbox

Product Description

Product Description

hole outputhigh torque transmission mechanical speed variator Planetary Speed Reducer small gearbox

HangZhou Fubao Electromechanical Technology Co., Ltd. mechanical speed variator Planetary Speed Reducer small gearbox is a new generation of practical products independently developed by our company:

Low noise: less than 65db.

Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.

High torque: higher than the standard planetary reducer torque.

High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.

High deceleration ratio: Modular design, planetary gearbox can be interlinked.

mechanical speed variator Planetary Speed Reducer small gearbox characteristic:

1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the mechanical speed variator Planetary Speed Reducer small gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.

2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.

3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.

4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
 

Compared with other reduction machines, mechanical speed variator Planetary Speed Reducer small gearbox machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.

Because of these characteristics,mechanical speed variator Planetary Speed Reducer small gearbox is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.

Product Parameters

WGK series parameters Model number WGK060 WGK085 WGK115 WGK160
Rated output torque 12~40Nm 40~135Nm 90~335Nm 270~900Nm
Reduction ratio L1:3,4,5,7,8,10         L2:12,16,20,25,28,32,35,40,56,64,70
L3:80,100,125,140,160,175,200,250,280,320,350,500,512,700,1000
Planetary gear backlash L1:8arc.min  L2:10arc.min   L3:12arc.min

Detailed Photos

Product Details

Other products

 

Company Profile

HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.

The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.

 

Factory Display

FAQ

Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Application: Motor, Machinery, Agricultural Machinery, Packaging Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pto gearbox

Lubrication Requirements for Smooth Functioning of Miter Gearboxes

Proper lubrication is crucial for ensuring the smooth and efficient operation of miter gearboxes. Follow these lubrication requirements to maintain optimal gearbox performance:

  1. Appropriate Lubricant: Select a high-quality lubricant specifically designed for gear applications. The lubricant should have the necessary viscosity and additives to provide adequate protection and reduce friction.
  2. Lubricant Compatibility: Ensure that the selected lubricant is compatible with the materials used in the gearbox components, such as gears, shafts, and bearings. Incompatible lubricants can lead to degradation of materials and reduced performance.
  3. Lubrication Interval: Follow the manufacturer’s recommendations for lubrication frequency. Regular lubrication helps prevent wear, reduce friction, and dissipate heat generated during operation.
  4. Proper Quantity: Apply the correct amount of lubricant to ensure proper coverage of gear teeth and other moving parts. Insufficient lubrication can lead to increased friction and premature wear.
  5. Lubrication Method: Use the recommended lubrication method, which may involve oil bath, splash lubrication, or forced lubrication, depending on the gearbox design and application.
  6. Temperature Considerations: Take into account the operating temperature of the gearbox and choose a lubricant that can withstand the temperature range. Extreme temperatures can affect the viscosity and performance of the lubricant.
  7. Sealing and Contamination Prevention: Ensure that the gearbox is properly sealed to prevent the entry of contaminants, such as dirt, dust, and moisture, which can degrade the lubricant and cause damage to components.
  8. Regular Inspection: Periodically inspect the lubricant for signs of contamination, degradation, or depletion. Replace the lubricant if any abnormalities are detected.
  9. Re-greasing: In cases where miter gearboxes are subjected to heavy loads, high speeds, or harsh conditions, consider implementing a re-greasing schedule to maintain adequate lubrication levels and extend component life.

Following these lubrication requirements ensures that miter gearboxes operate smoothly, efficiently, and with reduced wear, ultimately contributing to the overall reliability and longevity of the mechanical system.

pto gearbox

Differences Between Miter Gearboxes and Other Types of Gearboxes

Miter gearboxes possess distinct characteristics that differentiate them from other types of gearboxes, such as helical, spur, and planetary gearboxes. These differences contribute to their unique capabilities and suitability for specific applications:

  • Gear Arrangement: Miter gearboxes utilize bevel gears that intersect at a 90-degree angle. In contrast, helical and spur gearboxes use parallel or co-planar gear arrangements, and planetary gearboxes feature multiple gears arranged around a central sun gear.
  • Motion Direction Change: Miter gearboxes excel at changing the direction of rotational motion by 90 degrees. Other gearboxes may change motion direction by different angles or maintain the same direction.
  • Compactness: Miter gearboxes are known for their compact design, making them suitable for applications with limited space. Planetary gearboxes, while compact, have a different internal structure.
  • Backlash Control: Miter gearboxes are designed to minimize backlash and ensure accurate motion transfer. Helical and spur gearboxes may have more backlash due to their gear arrangement, while planetary gearboxes can provide good backlash control.
  • Torque and Speed: Different gearboxes vary in their torque and speed capabilities. Miter gearboxes are suitable for moderate torque and speed applications, while planetary gearboxes offer high torque density.
  • Applications: Miter gearboxes are commonly used for applications requiring 90-degree changes in motion direction, such as conveyor systems, printing machinery, and some types of industrial equipment. Helical and spur gearboxes are prevalent in various machinery and equipment. Planetary gearboxes find use in robotics, aerospace, and heavy machinery.

Each type of gearbox has its own advantages and is chosen based on the specific requirements of the application, including space constraints, motion control precision, torque, and speed needs.

pto gearbox

Advantages of Using a Miter Gearbox in Various Applications

Miter gearboxes offer several advantages in various mechanical applications:

  • Change of Motion Direction: One of the primary advantages of miter gearboxes is their ability to change the direction of rotational motion by 90 degrees. This allows for efficient power transmission and motion redirection in tight spaces or when components need to be oriented differently.
  • Space Efficiency: Miter gearboxes are compact and space-saving solutions for transmitting power around corners or obstacles. They eliminate the need for additional components or complex mechanisms to achieve a change in motion direction.
  • Torque Transmission: These gearboxes are capable of transmitting high levels of torque between intersecting shafts. The meshing of bevel gears provides a solid and reliable torque transfer, making miter gearboxes suitable for applications requiring substantial torque conversion.
  • Precision and Alignment: Miter gearboxes ensure accurate alignment and synchronization between input and output shafts. The conical shape of bevel gear teeth allows for smooth meshing and reduces the potential for backlash, ensuring precise motion transfer.
  • Wide Range of Applications: Miter gearboxes find utility in diverse industries, including robotics, automotive, aerospace, manufacturing, and machinery. Their flexibility and ability to redirect motion make them suitable for tasks ranging from conveyor systems to steering mechanisms.
  • Reduced Maintenance: The simplicity of the miter gearbox design often results in lower maintenance requirements. The robust construction and efficient power transmission contribute to extended operational lifetimes.

Overall, the advantages of using a miter gearbox make it a versatile and effective solution for applications that demand changes in motion direction, space-saving designs, and reliable torque transmission.

China manufacturer Hole Outputhigh Torque Transmission Mechanical Speed Variator Planetary Speed Reducer Small Gearbox   best automatic gearbox	China manufacturer Hole Outputhigh Torque Transmission Mechanical Speed Variator Planetary Speed Reducer Small Gearbox   best automatic gearbox
editor by CX 2023-10-18