China best RC 120 Rotary Cutter Flail Shredders Gearbox with 15 Spline sequential gearbox

Product Description

RC 120 Rotary Cutter Flail Shredders gearbox with 15 spline 

The RC120 and RC125 are available with a hydraulic end tow pack for easy transport. Narrow transport width, so that the line cutter can be through the narrow door, easy to transport on the road. The end drag bag utilizes 2 cylinders to raise and lower the machine and collapsible tongue with minimal interference when reinforced concrete is in use. (SMVS and safety lights are now standard equipment.)

Features

• Split tough cotton, BT corn stalks, milo, rice,
• Accelerate the decomposition of plant residues for nutrients
• Provide ground cover to minimize wind and water erosion.
• Available in 15 ‘, 18 ‘, 20 ‘and 25’ widths to fit the row spacing of your crop.

RC Flail Shredders come with a 5 year limited transmission warranty and are available with 3 point lift, half mount or pull Hitch in shredding widths of 15′, 18′, 20′ and 25′(25′ pull or half mount). The driveline comes with standard heavy equipment, including a Cat 5 or Cat 6 main driveline, a 207 HP 1000 RPM transmission, and a 5V belt drive belt to handle the power of larger tractors in harsh conditions. The shredder housing is a shaped 3/16″ thick hood with internal 3/16″ stiffeners in critical wear areas, increasing structural strength to the main machine and extending shredder life. The specially designed housing and 12,620 FPM* tip speed help ensure maximum CHINAMFG crushing and insect habitat destruction. Shredder blades are carbide surfaces that maximize wear life and provide more cutting per foot travel than most competing shredders. The resulting “mulch” speeds up the decomposition of material and the return of nutrients to the soil, while providing ground cover to help prevent erosion caused by wind and water.

Our Factory:

1. Shell: made of high rigidity fc-25 cast iron;
2. Gear: high purity alloy steel 20crmnt is used for quenching and tempering, carburizing, quenching and grinding;
3. Spindle: high purity alloy steel 40Cr quenching and tempering processing, with high hanging load capacity.
4. Bearing: equipped with tapered roller bearing with heavy load capacity;
5. Oil seal: imported double lip oil seal, with the ability of dust and oil leakage.
Product lubrication:
The use of proper lubricating oil for t spiral bevel gear commutator can give full play to the efficiency of the steering gear and improve its service life.
1. The initial wear period is 2 weeks or 100-200 hours. There may be a small amount of metal wear particles between them. Please clean the interior and replace it with new lubricating oil;
2. In case of long-term use, change the lubricating oil every half a year or 1000-2000 hours.
Technical parameters of T spiral bevel gear commutator:
It can be equipped with single horizontal axis, double horizontal axis, single vertical axis and double vertical axis 1:5, 1:5, 1:1, 1:5, 1:5, 1:1

Related products:

Application:

Company Profile:
Services
Also I would like to take this opportunity to give a brief introduction of our CHINAMFG company:

Our company is a famous manufacturer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china.

We have exported many products to our customers all over the world, we have long-time experience and strong technology support. 

-Ø Our Company with over 12 year’s history and 1000 workers and 20 sales.
-Ø With over 100 Million USD sales in 2017
-Ø With advance machinery equipments
-Ø With large work capacity and high quality control, ISO certified.
……

You also can check our website to know for more details, if you need our products catalogue, please contact with us.

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

pto gearbox

Proper Installation and Alignment of Miter Gearboxes

Installing and aligning a miter gearbox correctly is essential to ensure its optimal performance and longevity. Follow these steps to achieve proper installation and alignment:

  1. Preparation: Gather all necessary tools and equipment for the installation, including mounting hardware, shims, and alignment tools.
  2. Mounting Surface: Ensure that the mounting surface is clean, flat, and free from any debris or contaminants that could affect the gearbox’s alignment and operation.
  3. Alignment Tools: Use precision alignment tools, such as dial indicators or laser alignment systems, to accurately measure and adjust the alignment of the gearbox and its input and output shafts.
  4. Check for Parallelism: Align the input and output shafts of the gearbox to be parallel to each other and perpendicular to the mounting surface. This step is crucial to prevent misalignment-induced wear and reduce backlash.
  5. Adjustment: Use shims or other adjustable components to fine-tune the alignment. Make incremental adjustments while continuously checking the alignment with the chosen alignment tools.
  6. Bearing Loads: Ensure that the bearings supporting the gearbox shafts are properly lubricated and preloaded according to the manufacturer’s recommendations. Proper bearing preload helps maintain alignment and reduces wear.
  7. Tightening Bolts: Tighten the mounting bolts gradually and evenly to avoid introducing additional misalignment during the installation process.
  8. Runout and Clearance: Check for any runout or clearance issues during rotation by turning the input shaft. If there is any binding, interference, or abnormal noise, investigate and address the cause before finalizing the installation.
  9. Final Checks: Double-check the alignment using the alignment tools and ensure that the gearbox operates smoothly without any unusual vibrations, noises, or resistance.
  10. Documentation: Keep a record of the alignment measurements and adjustments made during the installation process. This documentation can be valuable for future reference and maintenance.

Proper installation and alignment of miter gearboxes help optimize their performance, minimize wear and tear, and contribute to the overall efficiency and reliability of the mechanical system in which they are used.

pto gearbox

Advantages of Miter Gearboxes Over Other Gear Systems

Miter gearboxes offer distinct advantages in certain scenarios that make them preferred over other types of gear systems:

90-Degree Motion Change: Miter gearboxes excel at changing the direction of motion by 90 degrees. This makes them ideal for applications where a right-angle change in motion is required.

Compact Design: Miter gearboxes have a compact and space-saving design, making them suitable for applications with limited space constraints.

Precision Steering: In automotive steering systems, miter gearboxes provide precise and accurate control over the direction of vehicles, contributing to safe and responsive steering.

Reduced Backlash: Miter gearboxes are designed to minimize backlash, ensuring accurate and smooth motion transfer. This makes them suitable for applications where precision and responsiveness are critical.

Customization: Miter gearboxes can be customized to suit specific torque, speed, and design requirements, making them adaptable to various applications.

Reliable Motion Transmission: Miter gearboxes provide reliable motion transmission and are often chosen for applications where consistent and accurate motion control is essential.

Low Noise and Vibration: The design of miter gearboxes can help reduce noise and vibration, making them suitable for applications where quiet operation is necessary.

Miter gearboxes are preferred in scenarios where their unique design and capabilities align with specific motion control and direction change requirements, offering efficiency, precision, and reliability.

pto gearbox

Advantages of Using a Miter Gearbox in Various Applications

Miter gearboxes offer several advantages in various mechanical applications:

  • Change of Motion Direction: One of the primary advantages of miter gearboxes is their ability to change the direction of rotational motion by 90 degrees. This allows for efficient power transmission and motion redirection in tight spaces or when components need to be oriented differently.
  • Space Efficiency: Miter gearboxes are compact and space-saving solutions for transmitting power around corners or obstacles. They eliminate the need for additional components or complex mechanisms to achieve a change in motion direction.
  • Torque Transmission: These gearboxes are capable of transmitting high levels of torque between intersecting shafts. The meshing of bevel gears provides a solid and reliable torque transfer, making miter gearboxes suitable for applications requiring substantial torque conversion.
  • Precision and Alignment: Miter gearboxes ensure accurate alignment and synchronization between input and output shafts. The conical shape of bevel gear teeth allows for smooth meshing and reduces the potential for backlash, ensuring precise motion transfer.
  • Wide Range of Applications: Miter gearboxes find utility in diverse industries, including robotics, automotive, aerospace, manufacturing, and machinery. Their flexibility and ability to redirect motion make them suitable for tasks ranging from conveyor systems to steering mechanisms.
  • Reduced Maintenance: The simplicity of the miter gearbox design often results in lower maintenance requirements. The robust construction and efficient power transmission contribute to extended operational lifetimes.

Overall, the advantages of using a miter gearbox make it a versatile and effective solution for applications that demand changes in motion direction, space-saving designs, and reliable torque transmission.

China best RC 120 Rotary Cutter Flail Shredders Gearbox with 15 Spline   sequential gearbox	China best RC 120 Rotary Cutter Flail Shredders Gearbox with 15 Spline   sequential gearbox
editor by CX 2023-09-26